Products

Electromagnetic Interference (EMI) Shielding

 

EMI Gaskets (Extruded, Molded, Spliced, Fabricated)
  • Conductive Elastomers
  • Conductive Form-In-Place
  • Wire Mesh
  • Oriented Wires
  • Woven Wire Mesh and Expanded Metal Foil
  • Compressed Mesh
  • Fingerstock
  • Fabric Over Foam
Conductive Coatings
Cable/Connector Shielding
EMI Shielding Tapes
Conductive Adhesives, Gap Fillers, Greases, and Sealants
EMI Laminates
EMI Shielding Air Ventilation Panels
Microwave Absorber
EMI Shielded Windows
Conductive Thermoplastics
Products01_sheetStock2

parkerLogo_small

 

 

When EMI shielding is required for an application, it’s important to choose the optimal solution based on performance and cost. Consider these questions when determining the right EMI shielding solution for your specific application:

  • What is the EMI shielding level (dB) required?
  • What is the frequency range?
  • What is the operating temperature range?
  • Is the operating environment indoor or outdoor?
  • Do you need the solution to serve as an environmental seal?
  • If so, is the outside environment corrosive?
  • What fluids will be in contact with the application?
  • What is the material composition of the substrate?

If you need application support in determining the best solution to your EMI shielding requirement, please don’t hesitate to contact our friendly and knowledgeable staff and we will assist you in finding the best solution for your specific application.


spacer10
spacer10
spacer10

Thermal Interface Materials (TIM)

 

  • Gap Filler Pads
  • High Performance Gels
  • Phase Change Materials and Pads
  • Attachment Tapes
  • Compounds
  • Greases
  • Dielectric Pads
  • Heat Spreaders

Products02_thermal2

parkerLogo_small

Thermal Interface Materials (TIM) help remove heat generated from the power source to the ambient environment. These thermally conductive products remove air gaps from the interface by conforming to the uneven mating surfaces and as a result, reducing the component temperature and maximizing product life. Consider these questions when determining the right TIM solution for your specific application.

  • What is the thermal conductivity (W/m-K) required?
  • What is the operating temperature range?
  • What is the gap thickness?
  • What is the material thickness needed?
  • Is a mechanical attachment required?
  • Is electrical isolation required?

If you need application support in determining the best solution to your TIM requirement, please don’t hesitate to contact our friendly and knowledgeable staff and we will assist you in finding the best solution for your specific application.


spacer10
spacer10
spacer10

Gaskets

 

  • Rubber
  • Cork
  • Rubber and Cork Blend
  • Non Asbestos
  • Felt
  • Foam
  • EMI Shielding
  • Thermal
  • Films
  • Tapes
  • Adhesives
  • Sponges
  • Thin Plastics
  • Mesh
  • Vegetable Fiber
Products03_DieCutGaskets

3m_logo_small parker_logo_small interfacesolutions_logo_small parkerLogo_small Rogerscorp_logo_small

Indian has been a custom fabrication specialist for over 30 years.

Our customers expect quality and service and we’ve been meeting their expectations for over 30 years.

 

Contact our friendly and knowledgeable staff for a quote or support on your next gasket requirement!

spacer10
spacer10
spacer10

Seals

 

  • Gask-O-Seals
  • Integral Seals
  • Fastener & Fitting Seals
  • PTFE FlexiSeals
  • Dynamic Metal Seals
  • Ultra-High-Temperature Metallic Seals
  • Metal Seals
  • Plastic Seals
  • PTFE FlexiLip Rotary Seals
  • FlexiCase Rotary Seals
  • Custom Molded or Machined Shapes
  • Rubber Bonded to Metal or Plastic
  • Custom Fabricated Shapes
  • Custom and Standard Extruded Profiles
  • ParFab Extruded Profiles/Spliced Products
Products04_OSeals
parker_logo_small      parkerLogo_small

 

We’re an authorized Parker EMG (Parker Seal) distributor and can support you with high performance sealing solutions based on your specific application requirements.

Need help finding the best sealing solution for your application? No problem! Contact our friendly and knowledgeable staff for application support and we will assist you in finding the best sealing solution for your application.


spacer10
spacer10
spacer10

O-Rings

 

  • Custom, Metric or Standard sizes
  • Custom Splicing
  • Available in all AS568 inch sizes
  • Backup Rings
  • Common O-Ring Elastomers
  • Buna/Nitrile (N, NBR, BUNA-N)
  • Ethylene Propylene Rubber (EPDM)
  • Butyl Rubber (IIR)
  • Viton/Fluorocarbon (V, FKM)
  • Fluorosilicone (FVMQ)
  • Hydrogenated Nitrile (HNBR)
  • Silicone Rubber (Q, MQ, VMQ, PVMQ)
  • Tetrafluoroethylene-Propylene (FEPM)
  • Neoprene/Chloroprene (C, CR)
  • Polyurethane (AU)
Products05_ORings
parkerLogo_small     DownloadORingHandbookButton

parker_logo_small

We’re an authorized Parker O-Ring distributor and can support you with high performance sealing solutions based on your specific application requirements.

Need help finding the best sealing solution for your application? No problem! Contact our friendly and knowledgeable staff for application support and we will assist you in finding the best sealing solution for your application.


spacer10
spacer10
spacer10

Retaining Rings

 

  • Custom or Standard sizes
  • Tapered Section
  • Constant Section
  • Spiral

Products06_RetainingRings

Smalley_logo_small    rotorclip_logo_small

spacer10
spacer10
spacer10

Electrical Hardware

 

  • Cable Ties
  • Cable Accessories
  • Wiring Duct
  • Surface Raceway
  • Power Connectors
  • Terminals
  • Grounding Connectors
  • Network Components

Products07_Electrical

Panduit_logo_smallHellermanTyton_logo_small2

LineSheet02